Identify the last communication on push-to-talk (PTT)

Learn to quickly identify the last person to communicate on a push-to-talk channel.

Overview 

Establishing clear communication with multiple users on the same PTT channel can be difficult. Identify the last person to speak on Post or mPost quickly with icons.

Before you start

Here are some things you must do before you start:

  • Set up push-to-talk in Settings > Equipment Mgmt > Select the pencil icon to edit > Activate push-to-talk.

 

Identify the last communication when using Post

To identify the previous communication: 

  1. Select the channel by going to Logbook Command Center
  2. Choose the microphone icon for push-to-talk.
  3. Choose the channel from the list. A grey sound wave icon indicates the last speaker on this channel. 

 

guardtek_ptt_soundwave icon.png

The icon resets if you refresh or leave the Command Center.

 

Identify the last communication when using mPost

In mPost, go to PTT (push-to-talk) and select a channel. After communication starts on the channel, the last person to speak is displayed above the microphone icon.

guardtek_ptt_participants.png


Leaving the channel resets this display.

Was this article helpful?
0 out of 0 found this helpful

Articles in this section